Gear-driven rotating sprinklers just like the ones contractors install. Only you don’t have to trench the lawn or pay for buried plumbing. They stay safely buried in place until needed. You can mow right over them. Just snap your hose on to the swiveling quick-connect and water pressure pushes the riser up 5 inches above the ground. A powerful stream throws water 17 to 37feet at 2.5 gallons per minute (at 30psi--further at higher psi). You set the rotation from 40-360 degrees. Both settings are right on top and easy to make while the unit is on or off. When you turn off the water, the riser drops back below ground where it stays ready till next time. All it takes is a garden trowel to dig a 4 inch hole, 9 inches deep. That’s it: plant them, point them, set them, forget them. No assembly required. Plant them right next to driveways or sidewalks, in flower beds—anywhere, really. Corners are good spots. Most front lawns can be watered with just two, each in an opposite corner. The back yard will probably take 3.
This new model includes a distance control dial right on top of the rubber cap making it easier than ever to make the distance setting.
Each sprinkler comes with an orange locator cap and an adjustment key. There are 4 hose quick-connects with auto stop and one manual stop quick-connect. Hoses with narrow internal openings such as Zero-G will not allow our auto stop valves to open so we're including a manual quick-connect to make sure you have at least one that will function. The auto/manual stop means you can turn on the water before connecting to the sprinkler and when you disconnect from the sprinkler the water cuts off. This saves you trips back and forth to the faucet. Three hose splitters (Y-connectors) are included to run multiple sprinklers off the same hose line or faucet. Written instructions are in the box and video instructions are at the Install tab of this website.